Audi > TT > 2000-2007 Body Interior 70 - Front door trim Front door trim, removing and installing
1 - Door trim
Remove screw cap - 5 - Remove screw - 4 - (1x).
Unclip inner and outer connecting pieces. .
Lift door trim about 20 cm upward and remove from door.
Detach release cable for interior door handle
Disconnect electrical connectors
Clip locators - 3 - (7x) must be clipped in place when installing door trim.

2 - Sleeve
3 - Clip locators
4 - Screw Tightening torque 7.5 Nm
5 - Screw cap
Front door trim, removing and installing Page 1 of 2
Detaching release cable
Pull release cable - 1 - out of guide - 2 - and detach.
Note:
When installing, make sure hook - 3 - is facing upward.
Disconnecting electrical connectors
Disconnect harness connectors at item - 2 - .
Removing screw cap
Insert pin - 2 - (max. dia. 2 mm) through hole on bottom part of switch trim.
Applying pin - 2 - press tab - 3 - slightly up and at the same time turn screw cap - 1 - in direction of - arrow

Download Audi TT Body Interior PDF Manual