Connecting The DI-704UP Broadband Router To Your Network
A. First, connect the power adapter to the receptor at the back panel of the DI-704UP and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED lights up indicating proper operation.
B. 1. Power off your Cable or DSL modem; the devices that do not have a on/off switch and will require you to unplug the power adapter. Now, the DI-704UP should be powered on and the Cable / DSL modem should be turned off. Cable / DSL modem (Power Off) – DI-704UP (Power On)
2.Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL modem. After the Ethernet cable is securely connected, power on the Cable / DSL modem by turning on the unit or plugging in the power adapter. Cable / DSL modem (Power On) – DI-704UP (Power On)
3. Insert the other end of the Ethernet cable to the WAN PORT on the back panel of the DI-704UP. The WAN LED light will illuminate to indicate proper connection. If the WAN LED is not illuminated, please go back to step B1 and repeat the steps.
C. Insert an Ethernet cable to LAN Port 1 on the back panel of the DI-704UP and an available Ethernet port on the network adapter in the computer you are using to configure the DI-704UP. The LED light for LAN Port 1 illuminates to indicate proper connection. (Note: The LAN Ports on the DI-704UP are Auto-MDI/MDIX. Meaning you can use a straight-through or crossover-Ethernet cable in the LAN Ports.)
D. The USB port on the DI-704UP is used to connect USB printers only. Connect one end of the printer cable to your printer and the other end to the DI-704UP.

Download pdf DI-704UP Ethernet Broadband Router and USB Print Server