How the clip looks is circled with a red circle and where the clips are positioned, is pointed out with red arrows. First you need to take off the door card, here is a short reminder of where the screws are. After you have removed the door card and the protective sheet, you have to take out this window lead so you get better access to the pins. To get it away, total unscrew the yellow circled nut and loosen the torx bolt (circled red). Now that you have done the above, move the lead out of the way.

Also remove the plastic bit that is held by the nut on the yellow circled spot. The next step is to unscrew the handle. To do so, unscrew the screw circled red and the nut in the opening (arrow).

Now comes the hard part, removing the handle lever. You need to remove one lever from inside the door and one from the outside. The inside lever. To take it off, you need to push it in the arrow direction. The lever is the one closer on the pic. The direction is to the lock on the door, or as in the pic to the connector. After you removed it, it will look like this.

Now that all that is done, we are about to take the handle off. Go to the front of the door and move the handle in the direction of the yellow arrow until it is free to be taken out by its down part. To take the down part out, just twist the handle in the red arrow direction.

Download pdf Fiat Bravo/a door handle replacement