There are a variety of ways to connect the Galaxy to the print server. Some offer improved performance, and some offer-improved performance along with the ability to locate the printer or plotter some distance away from the RIP. Here are the most common options, all of which are supported directly or indirectly by OpenRIP for PlanetB:

USB connection:
The new standard for connecting printers to computers is the universal Serial Bus (USB) port. It passes data to the printer much more quickly, while requiring fewer system resources to do so. The Galaxy uses USB 2.0 the port is located on the backside of the machine, next to the power cord.

Installing the Print Driver
1. Insert the Epson 7600 installation disk into the Printer Server. Select the 7600 Dye printer, and then click the right arrow.
2. The installation disk will begin loading the software.
3. A compatibility warning will appear, disregard and Click Continue Anyway.
4. The software will begin to look for the Galaxy. Click on Discontinue Search to finish the setup.
5. The compatibility warning will pop-up again, Click Continue Anyway.
6. The driver has been installed, Click OK to continue with the setup.
7. Using the USB cable connect the print server to the Galaxy, turn the Power on to the Galaxy.

Download pdf Galaxy Installation & User Guide