Introduction Features Protocol Support Connections and Pinouts Serial Port Serial Connector Pinouts Network Port Ethernet Connector Pinouts LEDs_ Product Information Label Technical Specifications 2: Getting Started Addresses and Port Number Ethernet (MAC) Address Internet Protocol (IP) Address Port Number Physically Connecting the Unit Methods of Assigning the IP Address DHCP AutoIP DeviceInstaller Install the DeviceInstaller Assign IP Address and Network Class Test the IP Address Add the Unit to the Manage List Opening a Configuration Window ARP and Telnet Serial Port Login

3: Configuring the Unit Configuring via Web Browser Configuring via the Setup Mode Window Using a Telnet Connection Using the Serial Ports Server Configuration (Network Configuration) IP Address Set Gateway IP Address Netmask Change Telnet Configuration Password DHCP Naming Channel 1 Configuration (Serial Port Parameters) Baudrate I/F (Interface) Mode Flow Port Number Connect Mode Remote IP Address Remote Port DisConnMode Flush Mode (Buffer Flushing) Pack Control DisConnTime (Inactivity Timeout) Send Characters Telnet Terminal Type Channel (Port) Password Expert Settings TCP Keepalive time in s ARP Cache timeout in s Security Settings Disable SNMP SNMP Community Name Disable Telnet Setup Disable TFTP Firmware Upgrade Disable Port 77FE (Hex) Disable Web Server Disable ECHO Ports Enable Encryption Enable Enhanced Password Factory Default Settings Exit Configuration Mode 4: Updating Firmware Obtaining Firmware Reloading Firmware Via DeviceInstaller Via TFTP Via Another Unit Via the Serial Port 5: Troubleshooting Technical Support Monitor Mode Via the Serial Port Via the Network Monitor Mode Commands 6: Binary to Hexadecimal Converting Binary to Hexadecimal Connect Mode Options Disconnect Mode Options Flush Mode (Buffer Flushing) Options Interface Mode Options Pack Control Options

Download pdf Lantronix UDS200 Users Manual