This Guide 8 Purpose and Audience Chapter Summary Additional Documentation 2: Introduction Capabilities Applications Protocol Support Addresses and Port Numbers Hardware Address IP Address Port Numbers Configuration Methods 3: Using DeviceInstaller Installing DeviceInstaller Assigning an IP Address Accessing the XPort Using DeviceInstaller Viewing the Current Configuration 4: Configuration Using Web Manager Accessing XPort Using DeviceInstaller Network Configuration Automatic IP Address Configuration Static IP Address Configuration Ethernet Configuration Server Configuration Host List Configuration Channel 1 Configuration Serial Settings Connection Settings - TCP Connection Settings - UDP Email Settings Trigger Configuration Configurable Pin Settings _ Apply Settings Apply Factory Defaults

5: Configuration via Telnet or Serial Port (Setup Mode) Accessing Setup Mode Telnet Connection Serial Port Connection Exiting Setup Mode 6: Setup Mode: Server Configuration Server Configuration (Option 0) IP Address Set Gateway IP Address Netmask: Number of Bits for Host Part Change Telnet Configuration Password DHCP Name 7: Setup Mode: Channel Configuration Channel 1 (Option 1) Baudrate I/F (Interface) Mode I/F Mode: XPort-485 only Flow Port Number Connect Mode a) Incoming Connection b) Response c) Active Startup d) Datagram Type e) Modem Mode Send the Escape Sequence (+++) in Modem Mode Auto Increment Source Port Remote IP Address Remote Port DisConnMode Flush Mode (Buffer Flushing) Pack Control Packing Interval Trailing Characters Send Characters DisConnTime (Inactivity Timeout) Send Characters Telnet Terminal Type Channel (Port) Password 8: Setup Mode: Advanced Settings Email Settings (Option 3) Mail Server Unit Name Domain Name Recipient 1 Recipient 2 Trigger 1 Trigger 2 Trigger 3 Expert Settings (Option 5) TCP Keepalive time in seconds ARP Cache timeout in seconds Enable High Performance Disable Monitor Mode at bootup HTTP Port Number SMTP Port Number RS-485 TX Enable Active Level MTU Size Enable alternate MAC Ethernet Connection Type Security Settings (Option 6) Disable SNMP SNMP Community Name Disable Telnet Setup Disable TFTP Firmware Upgrade Disable Port 77FE (Hex) Disable Web Server Disable Web Setup Disable ECHO Ports Enable Encryption Enable Enhanced Password Disable Port 77F0 (Hex) Default Settings (Option 7) Channel 1 Configuration Defaults Expert Settings Defaults Security Settings Defaults Email Settings 9: GPIO Interface Configurable Pins Features Control Protocol Guidelines Commands Examples 10: Firmware Upgrades Obtaining Firmware Reloading Firmware Using TFTP: Graphical User Interface Using TFTP: Command LineInterface Recovering the Firmware Using the Serial Port and DeviceInstaller 11: Monitor Mode Entering Monitor Mode Using the Serial Port Entering Monitor Mode Using the Network Port Monitor Mode Commands 12: Troubleshooting Problems and Error Messages

Download Lantronix XPort User Guide pdf