01-11-3 01-11 OIL FILTER REPLACEMENT A5U011114300W01
1. Remove the oil filter using the SST.
2. Use a clean rag to wipe off the mounting surface on the oil filter body.
3. Apply clean engine oil to the O-ring of the oil filter.
4. Using the SST, tighten the filter according to the installation direction on the side of it or packing box.
5. Start the engine and inspect for oil leakage.
6. Inspect the oil level.

Add oil if necessary. (See 01-11-2 ENGINE OIL LEVEL INSPECTION.)
End Of Sie OIL PRESSURE INSPECTION A5U011102000W01
Warning
Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin washing with soap and water immediately after working with engine oil.
Hot engines and engine oil are hot, they can cause burns. Turn off the engine and wait until it and engine oil have cooled.
1. Remove the oil pressure switch.
2. Screw the SST into the oil pressure switch installation hole.
3. Warm up the engine to normal operating temperature.
4. Run the engine at the specified speed, and note the gauge readings.

Download