This software is provided to assist the enthusiast in performing tuning and data collection on the user’s car for the purpose of maintenance and performance improvement. We at blaZt strongly suggest you read this manual and understand the contents before using it to tune your vehicle. We make no warranty implied or otherwise regarding the use of this software or any hardware supplied by blaZt.

Communication- The Communication screen configures parameters required for NDS to access your ECU.
A. The port setting defaults will work for most users. Select a different COM port number if the port your cable is connected to is not COM 1.
B. Address read command - specifies the command to be used for reading ECU memory data. Some ECUs with daughter boards use command other than the default.
C. ECU Id - specifies target ECU. Engine ECU Id varies between regions and models. This is usually set to EF
D. Find ECU -This button tests for active ECU IDs.
E. 96 model z32 - Check the box if your car is a 1996 model year 300ZX. This setting allows for communication with 96 model 300zx OBDII complaint cars via the Consult I port. You may also have to check this box if your ECU is later than 1996 in some other models.
F. Auto Connect to ECU - This checkbox should be selected if you want NDS to connect automatically to your ECU each time the program starts.

Download pdf Nissan Data Scan User Manual