The newest AMX Touch Panels (Modero), TPI/4 Touch Panel Interfaces, and TPDesign4 software now come Computer Control ready. In combination with the NXA-USBCC (FG070-602), this innovative application allows the user to connect any computer to the control network. Simply plug in the USBCC stick into any computer to experience complete access to control your computer directly through an AMX Touch Panel.

The USB Control Stick contains everything that you need to implement
Computer Control functionality including:
• The amxCC server application
• The configCC configuration utility
• NetLinx cc-GuestPC Code Module
• Sample Code and Programming/Configuration Page.

Using the Configuration Utility
1. Connect the computer to an Ethernet Network that can communicate with the NetLinx Control System (FIG. 2).
2. Insert the USB Computer Control Stick into the USB port on the computer that is being controlled. A series of USB driver installation popup windows appear.
3. Confirm that a Confirm that a new USB detection icon () appears in the lower-right taskbar (on a PC) of the display window. This icon does not appear on a MAC.
4. Use the computer’s file browser to navigate to the USB stick’s drive location and open the Config folder on the USB Control Stick drive directory.
5. Double-click the configCC (AMX G4CC Config on a MAC) executable to run the utility (FIG. 3) from the NXA-USBCC drive.

Download pdf NXA-USBCC G4 USB Computer Control Stick Quick Guide