This guide will show you how to renew your old existing Bonnet Pin and Lock. Please read this guide through at least once before fitting.
Step 1. (Optional) Preparation prior to fitting
Before you start removing your old parts you may want to consider preventing your new parts from corroding like the existing ones. You could smear a protective oil or grease over the exposed metal and rub it over or you could like myself spray paint the metal parts.
Read the rest of this entry »

• 0 Comments

Tools Required:
-Philips head screw Driver
-3 small flat head screw drivers
-10mm Socket and ratchet
-Needle nose pliers
1. Unscrew the stock shift knob by rotating it counter clockwise.
2. Open the Storage compartment in the center console and remove the foam rubber mat in the bottom. Use a Phillips head screwdriver to remove the 2 screws.
Read the rest of this entry »

• 0 Comments

Removing a transmission and replacing a clutch is a complex and time-consuming procedure. By replacing it yourself, you alone are responsible for the safety and functionality of yourself and vehicle. If you do not want to take that chance, I recommend that you take you car to a Nissan certified mechanic. This article was written after my clutch was replace and the transmission was re-installed. It is very possible that I left out a few steps or remembered them differently. Read the entire article before starting, you may find something too challenging for your level of skill.
Read the rest of this entry »

• 0 Comments