Download IOS image from Cisco PIX Result Search:
OpenOffice.org 2.x Setup GuideThis document is designed to provide users with instructions on installing OpenOffice.org 2.x and its successors on their systems.
Starting with OpenOffice.org 2.x, installation is done using the native installers available on each system. This means that installation only requires that you unpack the download image and then launch the local tool.
Using the native installers will provide better upgrades et cetera. Language packs are mostly available from each Native Language Community and may also be available from http://oootranslation.services.openoffice.org/pub/OpenOffice.org/ plus the appropriate release.
RPM-based Installation
1. Unpack the downloaded image into a directory. For example,Currently, the following command would unpack into the current directory: tar xvzf Ooo_2.0.xxx_LinuxIntel_install.tar.gz .
1. su to root, if necessary.
2. cd into the directory with the unpacked image. This could be RPMS.
3. Then execute rpm -Uvh *rpm for the standard installation in /opt. If you prefer to install in another directory, try rpm -Uvh --prefix // *.rpm or something similar. When relocating, only relocate the base rpms, in other words, do not include any user interface RPMs as these must go in their default locations for proper system integration.
Note: Upgrade the core first and then upgrade the user interface. Separating steps 3 and 4 ensures a good upgrade.
4. cd into the desktop-integration directory and execute rpm -Uvh for the menu rpm that applies to your system. For example, on a RedHat-based system, you would use rpm -Uvh openoffice.org-redhat-menus-.noarch.rpm or similar.
5. Download and install any language packs needed for OpenOffice.org. For example, if you relocated Openoffice.org, you need rpm -Uvh --prefix ///What Is Web 2.0 Design Patterns and Business Models for the Next Generation of SoftwareThe bursting of the dot-com bubble in the fall of 2001 marked a turning point for the web. Many people concluded that the web was overhyped, when in fact bubbles and consequent shakeouts appear to be a common feature of all technological revolutions. Shakeouts typically mark the point at which an ascendant technology is ready to take its place at center stage. The pretenders are given the bum's rush, the real success stories show their strength, and there begins to be an understanding of what separates one from the other.
The concept of "Web 2.0" began with a conference brainstorming session between O'Reilly and MediaLive International. Dale Dougherty, web pioneer and O'Reilly VP, noted that far from having "crashed", the web was more important than ever, with exciting new applications and sites popping up with surprising regularity. What's more, the companies that had survived the collapse seemed to have some things in common. Could it be that the dot-com collapse marked some kind of turning point for the web, such that a call to action such as "Web 2.0" might make sense? We agreed that it did, and so the Web 2.0 Conference was born.
The list went on and on. But what was it that made us identify one application or approach as "Web 1.0" and another as "Web 2.0"? (The question is particularly urgent because the Web 2.0 meme has become so widespread that companies are now pasting it on as a marketing buzzword, with no real understanding of justNokia Bluetooth Headset BH-501 User Guidesearch for Bluetooth devices. See the user guide of your phone for. instructions. 5. Select the headset (Nokia BH-501) from the list of found devices
Nokia Bluetooth Headset BH-501 User Guide Issue 1 EN DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole respoibility that the product HS-71W is in conformity with the provisio of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2006 Nokia. All rights reserved. Reproduction, trafer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owne. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be respoible for any loss of data or income or any special, incidental,
Download manualParallelism and ConcurrencyConcurrency, parallelism • Sequential programs – one thread of control • Concurrent programs – multiple threads of control – communication • direct • indirect • Bacon: Fig. 1.1, 1.2, 1.3 Concurrency and hardware • single processor • multiprocessor: shared memory • multicomputer: separate memories independent actors • network: slower communication unreliable communic. • Bacon: Fig. 1.4, 1.5
Download pdf Parallelism and ConcurrencyViking Memory Installation Guide Apple Macintosh PowerBook 5300/100, 5300c/100, 5300cs/100, 5300ce/117 pdfThe Apple Macintosh PowerBook 5300/100 comes standard with 8MB of memory sol-dered. It can be expanded to a maximum of 56MB by installing the following Viking Components memory options into its one available expansion slot. The Apple Macintosh PowerBook 5300c/100 and 5300cs/100 come standard with 8MB or 16MB of memory soldered. They can be expanded to a maximum of 56MB or 64MB by installing the following Viking Components memory options into their one available expansion slot. The Apple Macintosh PowerBook 5300ce/117 comes standard with 32MB (16MB sol-dered + 16MB module) of memory.
It can be expanded to a maximum of 64MB* by installing the following Viking Components memory options into its one available expansion slot. Description Viking P/N 16MB Memory Module M5300/16, RM5300/16 32MB Memory Module M5300/32, RM5300/32 48MB Memory Module M5300/48, RM5300/48 *Requires the removal of the standard 16MB module. 5. Place the system right side up on a flat surface and open the display screen. Locate the side panels on each side of the keyboard panel. Gently lift these side panels up no more than an 8. Locate the memory expansion connector in the front left side corner of the open com-partment. To install a memory module, grip the module by its edges and align the con-nector on the module with the connector in the expansion slot. Make sure that the key-board cables are on top of the memory module before completely installing the module. Firmly press down directly over the connector on the module until it s wellModeling a dragon with NURBS in MayaThis piece of article will show you step by step of how the dragon is created using Maya. There are three type of modeling method in Maya, NURBS modeling, Subdivision modeling and Polygon modeling, each of them have their advantages and disadvantages. However we will build the dragon using patch NURBS surface techniques. The tools that I use to model this dragon are Birail tools, NURBS primitive, Fillet Blend Tools and etc.
In the first section, I will show you how the dragon is created by using Maya. Next section, texturing the dragon will be shown. We need to paint the texture and create bump map in PhotoShop, but before that, I will need Deep Paint 3D to create reference line on how the texture will be distorted by NURBS. The detail will be covered in the texturing section.
Before I start launching Maya, I will do some concept sketching on paper. This is important, as it will be easier for me to visualise the object I have in mind later on. I wanted to create a dragon between realistic and imaginative. I want it to look like a T-Rex but with horn and larger forelimbs. Only the side orthographic is needed to create the model. When I have done, I will scan in the sketch and save it as JPEG.
Download pdf Modeling a dragon with NURBS in MayaListProcessor ver 7.2 List-Owner ManualThis List-Owner Reference Manual provides an overview to the list-owner commands of the CREN® ListProcessor® list- and file-management software, also known as ListProc®. The commands documented in this reference are not generally available to subscribers who do not own the list affected by the command being used. This reference assumes familiarity with the ListProcessor User Manual and does not replicate that document’s explanation of ListProc’s subscriber commands.
This Owner’s manual is one of four documents of which list owners should be aware. All are available via anonymous ftp and Gopher from info.cren.net in the /listproc directory. Each file is available in Postscript (the .ps file extension), RTF (the .rtf file extension) and plain text (no file extension). These files are listed below (base file names are enclosed in parenthesis): 1) The List Owner’s Manual (ownerman) explains in detail how to manage a
Download ListProcessor ver 7.2 List-Owner ManualEpson Stylus RIP Users Guide ManualThe Epson Stylus RIP software lets you use your Epson Stylus Color or Epson Stylus Photo ink jet printer as a PostScript 3 (Macintosh, Windows 2000, and Windows NT) and level 2 (Windows 95 and 98) compatible printer. It reads the Adobe PostScript files automatically created by the Epson Stylus RIP printer driver, seamlessly converts them into raster images, automatically prints them on your printer. You can use the Espon Stylus RIP with both Macintosh and Windows systems, in standalone or networked configurations. Adobe Post Script is the industry standard for high-quality graphic output. All the elements in a document - including text, graphic, and other images - are processed and reproduced using Post Script code.
Then, when you print from an application such as QuarkXPress, the RIP software creates a raster image from the PostScript code and send it to your printer. Do you need PostScript? In many cases, you may not need the ability to print in PostScript, and for these occasions you should use the standard, non-PostScript driver that comes with your printer. Using the standard driver is also a good way to ensure that your computer and printer are connected and working properly, so make sure you install the non-PostScript Epson driver following the instructions in your printers setup documentation.
Download pdf Epson Stylus RIP Users Guide ManualAdvance Wars: Dual Strike Instruction Manual GuideConfirm that your Nintendo DS is turned off. Insert your Advance Wars: Dual Strike Game Card and turn the power on. Read the screen pictured to the right when it appears, then touch the screen when you are ready to proceed. • Press and hold the POWER Button to turn the power off. On the Nintendo DS system menu, touch the Advance Wars: Dual Strike panel. After a brief cinema scene, the title screen will appear. • If your system start up has been set to Auto Mode, you can skip this step. See the Nintendo DS hardware instruction booklet for more information.
When Touch to Start appears on-screen, simply touch the Touch Screen to begin. There are 11 different modes to choose from on the modeselection screen. Touch the Turn icon to turn the page. • See page 18 for information on each mode. X Button •Turn Page (during map selection) + Control Pad •Move cursor •Make selections A Button •Confirm selections •Select a unit •Display map menu (when terrain or a nonproduction property is selected) Touch Screen •All touch-screen control Y Button •Turn page when selecting maps
Download Advance Wars: Dual Strike Instruction Manual GuideMobileBridge Gateway Series MB6800 User GuideMB6800 is the industrial first and the most integrated WLAN and 3rd generation cellular (3G) solution for Enterprise, Home, Small Office and Home Office (SOHO).The products are simple to use and easily scalable. MB6800 is a 3G router for SMB market based on our MobileBridge™ platform technology.
MB6800 combines the best of Wi-Fi and 3G mobile communications technologies including CDMA 1x, EV-DO, EDGE, UMTS and supports EV-DO Release A and HSDPA. MB6800 bridges wireless networks of 802.11b/g standards and wired networks, allowing them to communicate with each other. MB6800 allows authorized users to share the Internet access. Use the instructions in this guide to help you connect MB6800, set it up, and configure it to work.
Download pdf MobileBridge Gateway Series MB6800 User Guide
