The TravelBridge™ G is the only Pocket Wi-Fi to Ethernet Adapter designed, configured and packaged specifically for the global hospitality market. The TravelBridge™ G instantly creates a wired Ethernet connection on any wireless network without additional cabling or hardware. The TravelBridge™ G is designed for use in hotel guest rooms, lobbies, conference rooms lounges, offices and trade show floors - anywhere within a Wi-Fi network requiring a guest accessible wired Ethernet connection with no additional cost to the existing infrastructure. The TravelBridge™ G is configured to work right out of the box on any open Wi-Fi network. Hotel owners who want to loan out the TravelBridge™ G to their guests can easily configure it with their property’s specific SSID, encryption and custom network login settings.
Read the rest of this entry »

• 0 Comments

Check the power cord connection and supply. (Connected using the D-sub cable) Check the signal cable connection. (Connected using the DVI cable) If you still see an error message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog. Press SOURCE/ button to have the monitor doublecheck the input signal source. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Preset Timing Modes) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.
Read the rest of this entry »

• 0 Comments

The MTi 133-2 range of modems has been designed for asynchronous data transmission on the switched telephone network up to 33600 b/s or on a voice band dedicated line. Adapted references make it possible to use the MTI133-2 in all countries around the world. It can be delivered with the KIT 12 accessories (1 RS232 cable, 1 power supply module and 1 desktop base) in order to fix it on a desk. Its characteristics make it well suited to the remote management and maintenance of industrial equipments : 9 to 40 or 40 to 60 VDC power supply. DIN rail mounting for use in an electrical cabinet. Small-sized metal case. Excellent EMC immunity. RS232 and RS485 (2 wires) asynchronous interfaces.
Read the rest of this entry »

• 0 Comments

The DLM4100 is a compact dial-up modem designed and manufactured to operate in full industrial applications. It is powered with an input voltage range of +8V to +15VDC. A 120VAC to unregulated 12VDC wall transformer power supply has been provided (24VDC versions also available). The operating temperature range of this device is 0° to 70° C. The (ET) Extended Temperature model is rated at -40° to +85° C. Any device connected to the modem must be set for a 10-bit word such as: Data Bits Stop Bits Start Bits 8 1 1 7 1 1 7 2 1 Parity None Even/Odd None Connections Cable connections are all made on one end of the unit. The DB-9 female (see pinout below) on the left is for the RS-232 data.
Read the rest of this entry »

• 0 Comments

Documentation Introduction Protocol Support Addresses and Port Number Serial RS232 Interface USB Interface Power Supply Ethernet Interface LEDs Product CD Technical Specifications Getting Started Physically Connecting the Unit Install USB Device Drivers NETUSB Software Interface Virtual COM Port Driver Installation Windows 2000 Virtual COM Port Driver Installation Windows XP Virtual COM Port Driver Installation Windows 98 SE Virtual COM Port Driver Installation Linux 2.40 Methods of Assigning the IP Address Hardware Address IP Address DHCP AutoIP Device Installer Install Device Installer RUN Device Installer Device Found Assign IP Assignment Using Device Installer Viewing the Current Configuration
Read the rest of this entry »

• 0 Comments

Overview Additional Documentation Application Examples Protocol Support Serial RS232 Interface -USB Interface Power Supply Ethernet Interface LEDs Product CD Technical Specifications Quick Start Required Information Hardware Address IP Address WLAN Settings Installing and Configuring the Wi232 Making a Wireless Connection Configuration Using Web-Manager Network Configuration Automatic IP Address Configuration Static IP Address Configuration Server Configuration Serial Tunnel Hostlist Configuration Channel 1
Read the rest of this entry »

• 0 Comments

The UCM-8x modems are a series of general-purpose industrial modems, which can be used for data communication through Public Switched Telephone Networks (PSTN) or Leased/Private Lines. The modems can operate in 2-wire, full-duplex, asynchronous modes at line rates up to 33.6 Kbps and can perform complete handshake and data rate negotiations. Tone and pattern detection functions required by the applicable ITU or Bell standards are supported and dialling, call progress, and the telephone line interface are supported and controlled through the AT command set.
Read the rest of this entry »

• 0 Comments

Macintosh PowerBook User s Guide · Microsoft Works diskettes · Netscape Package diskettes · Microsoft Works manual · AC Power adapter cable · Power cord · battery cap · modem · PC Card storage module · Carrying case Look over the PC Pick-up Form provided by the trainer · Glance through the list of items to see that you have everything Back View and Exterior Components Back View · Infrared window · I/O panel: I/O is an abbreviation for input/output. (Examples of I/O devices are the keyboard and a printer.
Read the rest of this entry »

• 0 Comments