Most 17” wheels will clear the outer diameter of the caliper. Wheel weights mounted on the inside of the wheel may need to be repositioned. The more critical clearance is the spokes of the wheel to the outer face of the caliper. Do not assume an 18, 19 or even 20 inch wheel will clear the outer face of the caliper. A minimum distance of 60.81mm, measured from the outer rotor face to the inside face of the wheel spokes. This is the net metal-to-metal measurement. We recommend at least 2mm additional clearance to clear the ST-40 caliper on our big brake kits. Please refer to the Wheel Fitment section of our website to confirm any wheel fitment issues.
Read the rest of this entry »

• 0 Comments

G-RAID is the world’s only FireWire storage solution specifically designed to support professional content creation applications. Multi-stream video playback with real- time effects and audio over FireWire is now a reality. G-RAID is also ideal for audio editing, backup and transporting content between systems. G-RAID combines the simplicity and affordability of FireWire with high-performance RAID technology resulting in a professional strength storage solution like no other. 2. SAFETY PRECAUTIONS The disk drives contained in your G-RAID disk array are delicate electronic instruments and are susceptible to damage due to excessive physical shock.
Read the rest of this entry »

• 0 Comments

As a result of advancements in automotive technology, today’s tire and wheel/rim fitments require special attention. By design, radial tire construction and low aspect ratios contribute to a vehicle’s ride and handling quality. Proper tire mounting, balancing and installation are critical to attaining a smooth vehicle ride. Vehicle vibration and a suspected problem tire may actually be due to an improperly balanced tire and wheel assembly or related to the mechanical condition of the vehicle. BALANCING The technical definition of balance is the uniform distribution of mass about an axis of rotation, where the center of gravity is in the same location as the center of rotation.
Read the rest of this entry »

• 0 Comments

Study these instructions completely before proceeding. Engine and/or turbocharger damage may occur if any component within these instructions is improperly installed. Turbonetics, Inc or any of its distributors cannot be held responsible for damages as a result of negligent or improper installation. This complete turbocharger system can be installed using common tools and automotive procedures, but installer must have a thorough knowledge of automotive engine operation and feel comfortable working on the vehicle. If in doubt, contact Turbonetics’ technical support staff at 805-581-0333, between the hours of 8:00AM and 5:00PM PST, Monday through Friday. Remove the turbocharger system from its carton and inspect for any obvious physical damage. All kit components are thoroughly inspected and carefully packaged prior to shipment from the factory.
Read the rest of this entry »

• 0 Comments

Heli Bars are designed to safely increase your riding comfort, however it is imperative that these instructions be followed to ensure correct installation. Failure to follow these instructions could result in improper installation and create a dangerous control situation. If you have any questions about installation call Heli Modified, Inc. at 1­800­859­4642. 1. Remove the damper weights from the ends of the bars. 2. On the right bar, loosen the throttle housing screws enough to spread the housing and disengage the locating pin.
Read the rest of this entry »

• 0 Comments

Honda Goldwing GL 1500, 1988-2000. THE safety accessory of the 21. st. Century.?. P/N 210-0049-0. Rev D1 (9-1-04), BTV. 2003 Muth Mirror Systems, LLC. …
Read the rest of this entry »

• 0 Comments

2000 / 2001 / 2002 — Suzuki GSXR-600 / 750 / 1000 …. CAUTION ? Install the muffler only on the specified model of motorcycle. Improper installation will…
Read the rest of this entry »

• 0 Comments