This manual supports: ThinkPad X60 (MT 1706, 1707, 1708, 1709, 2509, and 2510) ThinkPad X60s (MT 1702, 1703, 1704, 1705, 2507, 2508, 2533, and 2534) ThinkPad X61 (MT 7673, 7674, 7675, 7676, 7678, and 7679) ThinkPad X61s (MT 7666, 7667, 7668, 7669, 7670, and 7671) ThinkPad® X60, X60s, X61, and X61s Hardware Maintenance Manual Note Before using this information and the product it supports, be sure to read the general information under “Notices” on page 197. First Edition (May 2007) © Copyright Lenovo 2007. All rights reserved. U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule contract with Lenovo, if any, or the standard terms of this commercial license, or if the agency is unable to accept this Program under these terms, then we provide this Program under the provisions set forth in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in Data-General, FAR 52.227.14 (Alternate III).
Read the rest of this entry »

• 0 Comments

This tutorial introduces the concepts and techniques used to build 3D models in AutoCAD 2000. As a vehicle for learning these techniques, we develop a model of a whimsical structure that I have called the Monkish Shot Tower after a group of imaginary Monks who have refined the technology of manufacturing lead shot for firearms, and the like. The tower is designed around the perfect number 7, features an external spiral stair, an elaborate canopy on top, and a hole down the centre. The final structure is illustrated in Figure 1 below.
Read the rest of this entry »

• 0 Comments

This VolksWagen Golf and Jetta Routine includes the Air cleaner element renewal Air conditioning system check Alternator, power steering pump and air conditioner compressor drivebelt(s) check Antifreeze concentration check Automatic transmission and final drive fluid renewal Automatic transmission fluid level check Battery electrolyte level check Brake check Brake fluid renewal Brake pad and rear shoe lining check Clutch operation check Contact breaker point renewal and adjustment Contact breaker point check CV joint and boot check Engine oil and filter renewal Exhaust system check Fluid leakage and engine electrical system check Fuel and brake line, hose and union check Fuel filter renewal Fuel system control linkage check Gearbox oil level check Headlight beam alignment check Hinge and catch lubrication Ignition timing check Intensive maintenance Introduction Light, direction indicator and horn check Lock, hinge and latch mechanism check Seat belt check Slow running adjustment Spark plug renewal Steering gear check Sunroof guide rails cleaning and lubrication Suspension check Timing belt renewal Valve clearance check Vehicle underbody check Servicing specifications Refer to the end of “Weekly checks” Champion C101/C160 Lubricants, fluids and capacities Engine Oil filter Valve clearances 1.05 and 1.3 litre engines - pre August 1985: Warm: Inlet Exhaust Cold: Inlet Exhaust Hydraulic tappet free travel 1.05 and 1.3 litre - post August 1985, 1.6 and 1.8 litre (Maximum travel) 0.15 to 0.20 mm 0.25 to 0.30 mm 0.10 to 0.15 mm 0.20 to 0.25 mm 0.1 mm 50 % antifreeze (by volume) with water 5.0 to 10.0 mm deflection on longest run Cooling system
Read the rest of this entry »

• 0 Comments

The most interesting characteristic about the 2004 BMW 5 Series, from a collision repair perspective, is its construction. The front-end structure from the cowl forward is all-aluminum, while the rest of the vehicle’s structure is steel. The front portion of the lower rails is aluminum; the portion of the lower rails under the floor pan is steel.
Read the rest of this entry »

• 0 Comments