First thing you got to do is take off the plastic covers on the ceiling light. (circled red). You do it by taking a knife or a small flat screwdriver and you pull it off by pushing the knife in the arrow direction. Then after you have removed the plastic covers off, you will see two screws in the holes. Unscrew these out and pull thelight will fall off like in the pic. Then just pull it off.
Read the rest of this entry »

• 0 Comments

First you need to unscrew the cross link bar of the wish bone(white arrow). This will enable you easier taking off of the shock. To do so, get under the car while its not jacked up, and just unscrew the nut off completely.

After that, open the bonnet and pull off the plastic cap on the shock pad (white arrow). When removed it will look like this. Now take a spanner and a ratchet (6mm alen key) and put them on like on the pics left. When you have done that, just un tighten (1/2 - 1 turns) the nut. To un tighten the nut, hold the ratchet in place and turn the spanner. DO NOT unscrew more than that or take the nut off.
Read the rest of this entry »

• 0 Comments

The first thing you need to do is jack up the car and remove the wheel. After you have done that, you will be left with this. Now the first step in removing the caliper is to take off the spring on the front side. You do it using some pliers. The yellow arrow shows the spring. The second pic shows the caliper with the spring removed.
Read the rest of this entry »

• 0 Comments

The first step is to locate the MAF sensor. Its position is on the air intake system, after the air filter box.
The second step is to unplug the connector on the MAF sensor. It has a clip that holds it firmly in place, so you need to push the clip with your finger to release it. (red arrow) Then just pull the plug off.
The third step is to unscrew the two torx security screws. To do that, you will need a trox screwdriver T20. After the screws are out, gently pull the sensor out of his casing.
Read the rest of this entry »

• 0 Comments

How the clip looks is circled with a red circle and where the clips are positioned, is pointed out with red arrows. First you need to take off the door card, here is a short reminder of where the screws are. After you have removed the door card and the protective sheet, you have to take out this window lead so you get better access to the pins. To get it away, total unscrew the yellow circled nut and loosen the torx bolt (circled red). Now that you have done the above, move the lead out of the way.
Read the rest of this entry »

• 0 Comments

First thing you got to do is take off the plastic covers on the ceiling light. (circled red) You do it by taking a knife or a small flat screwdriver and you pull it off by pushing the knife in the arrow direction. Then after you have removed the plastic covers off, you will see two screws in the holes. Unscrew these out and pull the light will fall off like in the pic. Then just pull it off.
Read the rest of this entry »

• 0 Comments

The Drawing Tools are an added feature to Microsoft Word. They allow you to jazz up your document without opening a draw or paint program.
Choose Toolbars from the View Menu and select Drawing.
The Drawing Toolbar will be displayed at the bottom of the window.
Read the rest of this entry »

• 0 Comments

The following process was used to create a custom rig to study the conformational morphs of the HIV gp120 receptor as it binds CD4. A cartoon model can first be generated in Pymol, VMD or Chimera, exported as VRML and then converted to OBJ for import into Maya.
Read the rest of this entry »

• 0 Comments