The outer Xbox 360 “shell” is entirely screwless. Plastic friction tabs hold the case together. There are many different tutorials for opening the Xbox 360, with different methods. Here are some links to “opening the Xbox 360” tutorials. I decided not to cover opening the Xbox 360 in this tutorial since it is already long enough and there are many other tutorials for opening the Xbox 360.
Read the rest of this entry »

• 0 Comments

The first step is to locate the MAF sensor. Its position is on the air intake system, after the air filter box.

The second step is to unplug the connector on the MAF sensor. It has a clip that holds it firmly in place, so you need to push the clip with your finger to release it. (red arrow) Then just pull the plug off.
Read the rest of this entry »

• 0 Comments

First thing you got to do is take off the plastic covers on the ceiling light. (circled red). You do it by taking a knife or a small flat screwdriver and you pull it off by pushing the knife in the arrow direction. Then after you have removed the plastic covers off, you will see two screws in the holes. Unscrew these out and pull thelight will fall off like in the pic. Then just pull it off.
Read the rest of this entry »

• 0 Comments

Do not attempt this if you are inpatient, or you will end up breaking the glass and maybe hurting yourself.
I realise on the above pic it says Brava on the headlight but it is off a Marea.
Time required: 50 minutes
Tools required: 3 flat bladed screwdrivers, large, small and another in between. Best option would be a hot air gun, or a powerful hairdryer would work but will probably take longer.
Read the rest of this entry »

• 0 Comments

First of all we need to obtain the Fiat Marea rear door handles, once obtained we can now begin to fit them to the Fiat Bravo. Below are two examples of a Fiat Marea rear door handle and the Fiat Marea/Bravo front door handle.
FIAT MAREA/BRAVO FRONT DOOR HANDLE - Circled in the photograph is the rear mounting point for the bolt required to fit these handles to the front door.
Read the rest of this entry »

• 0 Comments

This guide will show you how to renew your old existing Bonnet Pin and Lock. Please read this guide through at least once before fitting.
Step 1. (Optional) Preparation prior to fitting
Before you start removing your old parts you may want to consider preventing your new parts from corroding like the existing ones. You could smear a protective oil or grease over the exposed metal and rub it over or you could like myself spray paint the metal parts.
Read the rest of this entry »

• 0 Comments

The first step is to locate the MAF sensor. Its position is on the air intake system, after the air filter box.
The second step is to unplug the connector on the MAF sensor. It has a clip that holds it firmly in place, so you need to push the clip with your finger to release it. (red arrow) Then just pull the plug off.
The third step is to unscrew the two torx security screws. To do that, you will need a trox screwdriver T20. After the screws are out, gently pull the sensor out of his casing.
Read the rest of this entry »

• 0 Comments

The first step is to remove the old (bravo) console. You do it like so. First remove the clips and screws near the front end of the console on its sides (circled red) Then remove the rubber in the “shelf“ of the bravo console using a knife or a small screwdriver and lift it up. Unscrew the screw underneath it. Lift the gear stick gator like in the pic above and use force to get the gear knob off – grip the gear knob with your hands and pull in the direction of the arrow (upwards)
Read the rest of this entry »

• 0 Comments