This guide will show you how to renew your old existing Bonnet Pin and Lock. Please read this guide through at least once before fitting.
Step 1. (Optional) Preparation prior to fitting
Before you start removing your old parts you may want to consider preventing your new parts from corroding like the existing ones. You could smear a protective oil or grease over the exposed metal and rub it over or you could like myself spray paint the metal parts.
Read the rest of this entry »

• 0 Comments

First you need to remove the old headlights. You do it like so. Take out the two screws circled red, they are the only thing that holds the lights in place. Now when you have removed the screws, you need to push the light in the blue arrow direction (opposite direction on the other headlight) so you can pull out a ball head screw out of its holder. If it doesn’t go out easy, take a look where the yellow arrow points (in the corner of the wing) and you will see the ball head screw. Spray it with a bit of WD40 or some silicone spray so it can come out easily. Now push/hit the head light out of it.
Read the rest of this entry »

• 0 Comments