The Apple Macintosh PowerBook 5300/100 comes standard with 8MB of memory sol-dered. It can be expanded to a maximum of 56MB by installing the following Viking Components memory options into its one available expansion slot. The Apple Macintosh PowerBook 5300c/100 and 5300cs/100 come standard with 8MB or 16MB of memory soldered. They can be expanded to a maximum of 56MB or 64MB by installing the following Viking Components memory options into their one available expansion slot. The Apple Macintosh PowerBook 5300ce/117 comes standard with 32MB (16MB sol-dered + 16MB module) of memory.

It can be expanded to a maximum of 64MB* by installing the following Viking Components memory options into its one available expansion slot. Description Viking P/N 16MB Memory Module M5300/16, RM5300/16 32MB Memory Module M5300/32, RM5300/32 48MB Memory Module M5300/48, RM5300/48 *Requires the removal of the standard 16MB module. 5. Place the system right side up on a flat surface and open the display screen. Locate the side panels on each side of the keyboard panel. Gently lift these side panels up no more than an 8. Locate the memory expansion connector in the front left side corner of the open com-partment. To install a memory module, grip the module by its edges and align the con-nector on the module with the connector in the expansion slot. Make sure that the key-board cables are on top of the memory module before completely installing the module. Firmly press down directly over the connector on the module until it s well seated in the slot. Do not force the module into position. The module can only be placed in the expan-sion slot one way due to the position of the connector.

Download Viking Memory Installation Guide Apple Macintosh PowerBook 5300/100, 5300c/100, 5300cs/100, 5300ce/117 pdf