Congratulations on your choice of a new QL Water Heater. A choice that will help you bring out the best in boating pleasure. To give you the best benefit of the product and to facilitate your installation, we kindly ask you to follow the recommendations and instructions below.

The QL Water Heaters are built with materials that withstand the rigors of the marine environment. Being an electrical appliance, the Water Heater should be installed in a ventilated location where it will not be subjected to humidity and external water spray. All QL Water Heaters are insulated with high efficiency, auto extinguishable cellular polyurethane.

The distance between the engine and the Water Heater should be as short as possible. Locate the Water Heater in an accessible position so that the water connections, pressure relief/non return valve and electrical heating element (30 cm long) remain accessible. Install the Water Heater in a ventilated location in order to prevent sweating which might be mistaken for water loss.

The Water Heater should be firmly secured with mounting brackets to a solid structure using bolts, nuts and lock washers. Bear in mind that the total weight of the Water Heater is its weight plus all the water it contains.

The Water Heater can be mounted either horizontally or vertically to bulkhead, deckhead or floor. The hot water outlet is placed in the far, top end of the bowl to ensure that the warmest possible water is used at every time even when vertically mounted.

Before mounting check the information on the sticker inside the plastic cap. This information is essential for the correct installation and maintenance of the Water Heater.

IMPORTANT! This product is covered by a limited warranty. It is restricted to the product itself and no liability will be assumed for damage occurred due to negligance of the contents in this manual.

Download pdf Volvo Penta Quality Line Marine Water Heaters Owners Manual