Capabilities Applications Protocol Support Configuration Methods Addresses and Port Numbers Hardware Address IP Address Port Numbers 3: Using DeviceInstaller Accessing WiPort using DeviceInstaller Viewing the WiPort’s Current Configuration 4: Configuration Using Web-Manager Accessing WiPort Web-Manager using Device Installer Network Configuration Network Mode Configuration Automatic IP Address Configuration Static IP Address Configuration Server Configuration Host List Configuration Channel 1 and Channel 2 Configuration Serial Settings Connection Settings - TCP Connection Settings - UDP Email Configuration Trigger Configuration WLAN Configuration Configurable Pin Settings Updating Settings Applying Defaults

5: Configuration via Serial Mode or Telnet Port 34 Accessing Setup Mode Telnet Access Serial Port Access Server Configuration Network Mode Set the IP Address Set the Gateway IP Address Set the Netmask Change Telnet Configuration Password DHCP Name Channel 1 and Channel 2 Configuration Baudrate I/F (Interface) Mode Flow Port Number Connect Mode Send the Escape Sequence (+++) in Modem Mode Auto Increment Source Port Remote IP Address Remote Port DisConnMode Flush Mode DisConnTime (Inactivity Timeout) SendChar 1 and SendChar2 Telnet Terminal Type Channel (Port) Password Email Configuration Mail Server Unit Name Domain Name Recipient 1 Recipient 2 Trigger 1 Trigger 2 Trigger 3 WLAN Settings Topology Network Name (SSID) Adhoc Network Channel Security WEP WPA WPA2/802.11i Fixed or Automatic Data Rate Transmission Data Rate Enable Power Management Expert Settings TCP Keepalive Time ARP Cache Timeout CPU Performance HTTP Port Number SMTP Port Number MTU Size Alternate MAC Address Ethernet Connection Type Configurable Server Port Number Security Settings Disable SNMP SNMP Community Name Disable Telnet Setup Disable TFTP Firmware Upgrade Disable Port 77FE (Hex) Disable Web Server Disable Web Setup Disable ECHO Ports AES Encryption Enable Enhanced Password Disable Port 77F0 (Hex) Default Settings Channel 1 Configuration Channel 2 Configuration WLAN Settings Expert Settings Security Settings Email Settings Exit Configuration Mode 6: Configurable Pins 62 Defaults Settings Features Control Protocol Guidelines Commands Examples 7: Monitor Mode 67 Entering Monitor Mode via the Serial Port Entering Monitor Mode via the Network Port Monitor Mode Commands 8: Wireless Bridging 69 Configuring the WiPort in Bridging Mode Method 1 Method 2 Method 3 9: Updating Firmware 71 Obtaining Firmware Reloading Firmware Using TFTP: Graphical User Interface Using TFTP: Command Line Interface Recovering the Firmware Using the Serial Port

Download WiPort User Guide pdf